Wired Controller XK55
15
After turning on the unit, press
▲ ▼ to adjust operating temperature and
the temperature setting range is 16℃~30℃.
Note:
Under auto mode, the temperature adjust button is invalid.
Press ON/OFF button to turn on or turn off the unit.
After turning on the unit, press Fan to select fan speed. After each pressing of
that button, the fan speed will change in below sequence:
Note:
① Under drying mode, the fan speed is defaulted at low speed and it can’t be
adjusted.
② Under floor heating mode, the fan speed is invalid.
Press function button to enter into function page.
To Next Page
Loading...
