Spare Parts
Page 90 of 111
The specific appearance of the spare parts is
subject change without notice; the function
however will not change
Validation & Calibration Guide
Recommended Spare Parts Kit for WM
and WMP Type A (02314 & 02559) for 1-
year operation
•
2 x Pump Impeller
•
1 x Shaft Seal
•
2 x End Cover
•
1 x O-ring for End Cover
•
1 x Shaft V-ring
•
1 x Wiper Blade
•
1 x Electrode for pH Sensor
•
1 x Gasket for pH Sensor
•
2 x O-ring PAH Chamber
•
1 x Turbidity O-ring
Recommended Spare Parts Kit for WM
and WMP Type B (pn: 03627 & 03628)
for 1 - year operation
• 2 x Impeller for Pump NBR Ø 55 mm
• 1 x Mechanical Seal
• 1 x Wear Plate without Hole
• 1 x Wear Plate with Punched hole st.s
• 3 x O-Ring for Impeller Pump
• 1 x Tape
• 1 x Shaft Key
• 1 x Sandpaper
To Next Page
Loading...
Need help?
General
