Green Machine e210 - User Manual

To Next Page

POWER SWITCH

OFF ......... 



ON 





.....



 .......

 ......

 ......

OFF















e210 Electric Excavator Quick Start Guide

















’























.

LEVER LOCK

THROTTLE

Need help?

Do you have a question about the Green Machine e210 and is the answer not in the manual?

The Green Machine e210 Electric Excavator is a battery-powered, low-emission construction equipment designed for various digging and earthmoving tasks.

Function Description:

The e210 operates as an electric excavator, performing functions such as digging, slewing, auxiliary work, dozer blade operation, and traveling. Its primary function is to excavate and move material, with the dozer blade assisting in leveling and pushing material. The machine is designed for quiet operation and zero emissions, making it suitable for environments where noise and air pollution are concerns.

Important Technical Specifications:

Weight: 2370 lb (1075 kg)
Load Securement: 3/8" grade 70 transport chain with 3/8" ratchet binders, 1x 15' chain, 4x 10' chains.
Charging: The e210 charger plugs into a standard 220V/50A or 120V/20A AC outlet. The charger light illuminates when charging is complete. The machine is designed to be charged for 24 hours to maintain battery health, and it is recommended to keep it plugged in when not in use for more than 24 hours. The charger can be either 120VAC or FAST CHARGER into either 240 or 120VAC.
Battery: The machine uses Li-ion cells. A battery gauge indicates the remaining energy, similar to a fuel gauge. A low battery light illuminates when the battery reaches 10% remaining, and a buzzer sounds when the battery is at 7%. A battery error light indicates an issue with the battery system.
Operating Temperature: The machine can operate in temperatures down to -4 °F (-20 °C). If the machine is started in temperatures below -4 °F (-20 °C), the battery will automatically start to charge to warm up.

Usage Features:

Power Switch: The power switch has OFF and ON positions. To start the motor and insert/remove the key, the switch must be in the OFF position. To run the motor and engage the electrical equipment, the switch must be in the ON position.
Lever Lock: Before standing up from the operator's seat or leaving the work equipment to the ground, the safety lock lever must be raised to engage the lock and stop the engine. If the controls are accidentally touched when the safety lock lever is locked (unlocked), the machine will suddenly move and cause serious injury or death. When the lever is raised, the lever stand springs up to lock the lever.
Throttle: The throttle controls the motor speed.
- (A) Stopped
- (B) Medium speed
- (C) Maximum speed
Folding the Canopy: The canopy can be folded down for transport or storage. To fold, pull out the R-pins from the two lock pins on the left and right sides. Pull out the lock pin (1) from one side. Pull out the other side lock pin (1) while supporting the upper canopy (15 kg/35 lb) by hand. Slowly lower the upper canopy in a rearward direction to fold it down. When folding the upper canopy, be sure to lower it slowly to avoid injury.
Track Width Switching: The machine has a track width switching feature to adjust the width of the crawler.
- To switch, turn the selector lever to the (R) side.
- Push the blade lever forward (B) to increase the track width (1020 mm or 40.2 in.).
- To decrease the track width (750 mm, 29.5 in.), raise the machine body by using the hoe attachment and the dozer blade.
- Always operate the machine with the track width extended to 1020 mm (40.2 in.) to maximize machine stability. If the machine is operated with the track width narrowed (750 mm, 29.5 in.), the machine may tip over due to its poor stability.
- If the machine must be operated with the narrowed track width (750 mm, 29.5 in.), traveling should be done after folding the hoe attachment, lowering the boom to lower the center of gravity and keeping the machine facing forward.
- Important: All debris, mud, soil, stones, etc. must be removed from the track frame before switching the track width. Do it in a safe manner and do not work under the machine.
- This machine is able to change the track width. Normally, it is best to operate with the crawler width extended for machine's stability.

Maintenance Features:

Charging: The e210 should be plugged into a standard 220V/50A or 120V/20A AC outlet. The charger light will turn off when charging is complete. It is recommended to keep the machine plugged in when not in use for more than 24 hours to maintain battery health.
Battery Life: The Li-ion batteries used in the Green Machine do not have "memory" like some other batteries. Use as little of the battery as you need, and then plug the machine back in to charge.
Troubleshooting:
- The e210 will not run: Check throttle is not at zero. Check that battery gauge is not zero. Check for a battery error. Check the outside temperature. The e210 will not run below -4 °F (-20 °C).
- The e210 will not charge: Check for a battery error. Check that the wall outlet has power. Check the outside temperature. The e210 will not charge below -4 °F (-20 °C). Move the e210 into a warmer area. Plug in the e210 to charge. When the battery has warmed up the e210 will automatically start to charge the battery.
General Maintenance: The Green Machine is a brushless electric motor system, so it does not require engine maintenance. The battery is automatically maintained by a sophisticated battery management system. The drive system has no fluids or filters to change. Refer to the operator and service manuals for scheduled maintenance.

Green Machine e210 Specifications

General

Brand	Green Machine
Model	e210
Category	Excavators
Language	English