To Next PageTo Next Page
Need help?Do you have a question about the Green Machine GMMT6200-STA and is the answer not in the manual?
Ensure a clean, well-lit, and hazard-free workspace before operating the tool. Keep area clear of debris.
Stay alert, use common sense, wear proper protective equipment, and dress appropriately for safe operation.
Use the tool as intended, maintain it properly, handle it with both hands, and keep it clean and dry.
Recharge only with specified chargers, handle batteries with care, avoid extreme temperatures, and dispose of them properly.
Have the tool serviced by qualified personnel using identical replacement parts to maintain safety.
Follow specific safety guidelines for string trimmers, including proper handling, maintenance, and avoiding specific line types.
Properly fit the safety guard before use. Ensure all bolts and washers are secured correctly.
Refer to the power head manual for starting and stopping procedures. Ensure tool is fully assembled before operation.
Clear area, wear safety gear, and operate the trimmer with a firm grip, keeping it parallel to the ground.
Adjust the cutting diameter to 14 or 16 inches by rotating the cut-off blade.
Do not alter the line-cutting blade assembly. Ensure proper line length to avoid motor overheating.
Replace the cutting line correctly by aligning the spool, inserting the line, and winding it to the proper length.
Replace the disposable line cartridge or the entire trimmer head if damaged, following the specified procedures.
Periodically lubricate transmission gears with grease, checking the level and refilling to 3/4 capacity as needed.
Clean the trimmer with a damp cloth and mild detergent. Avoid water immersion and strong detergents. Dry thoroughly.
Store the trimmer indoors in a dry, locked place. Remove the battery before transporting or storing.
General| Brand | Green Machine |
|---|---|
| Model | GMMT6200-STA |
| Category | Trimmer |
| Language | English |
