45
EN
TECHNICAL DATA
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.
BOX CONTENTS
1. Screwdriver
2. Transport bag
3. Rechargeable battery
4. Charger
5. Instruction manual
• Remove the product and accessories from the box. Make sure that all items are present.
• Inspect the product to ensure that it has not been broken or damaged during transport.
• Do not discard the packaging material until you have carefully inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, please contact the Ofcial Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
ATD200L
Nominal voltage 20V
Impact rate 0-3500rpm
No load speed 0-3000rpm
Torsional force 130 Nm
Tool holder 1/4” (6.35mm)
Battery charging time 1 hour
Battery 20V 2.2Ah
Compatible charger CBT200L
Weight 2Kg
To Next Page
Loading...