Do you have a question about the GREENGER G3 2023 and is the answer not in the manual?
Category | Electric Scooter |
---|---|
Motor Power | 500W |
Tire Size | 10 inches |
Max Load | 120 kg |
Brakes | Disc brake |
Weight | 55 lbs (25 kg) |
Explains the lithium-ion battery and electric motor relationship and charging.
A table defining various fault codes (E0101-E0156) for the vehicle's electronic system.
Describes how error codes (E0**) are displayed on the instrument when the system is faulty.
Recommendations for preparing the motorcycle before its initial ride, including manual review.
Guidance on proper braking techniques, including using front and rear brakes.
Guidance on adjusting suspension based on rider weight for optimal handling.
Method to check static sag by measuring unloaded and loaded rear wheel positions.
Method to check riding sag by measuring unloaded and rider-seated rear wheel positions.
Steps to adjust spring preload using retaining and adjusting rings.
Instructions on how to adjust rebound damping using the adjusting screw.
Step-by-step guide for removing the front shock absorber.
Step-by-step guide for installing the front shock absorber.
Procedure for removing the lower triple clamp from the steering stem.
Procedure for installing the lower triple clamp onto the steering stem.
Method to check for play in the steering head bearings.
Procedure for adjusting the steering head bearing play.
Procedure for installing the rear shock absorber.
Procedure to check and measure the correct chain tension.
Steps to adjust the chain tension using the adjusting screws and nuts.
Inspection of chain, sprockets, and guide for wear and damage.
Procedure for removing the rear shock absorber.
Procedure to check front and rear brake disc thickness and wear limits.
How to check the front brake fluid level and identify potential leaks or worn pads.
Instructions for adding front brake fluid, including safety precautions.
How to check the rear brake fluid level and identify potential leaks or worn pads.
Instructions for adding rear brake fluid, including safety precautions.
Procedure to check and measure the free travel of the foot brake lever.
Steps to adjust the free travel of the foot brake lever.
Procedure to check the minimum thickness of the front brake pads.
Step-by-step instructions for changing the front brake pads.
Procedure for charging the battery, including characteristics and safety warnings.