Greenlee Textron Inc. / Subsidiary of Textron Inc.
2
815/397-7070
Tray Type Sheave
The 658 Tray Type Sheave is designed to help roll and
guide cable during tray pulls.
Installation
1. Position the tray frame where needed.
2. Clamp at least 2 of the of the cable tray rungs
between the tray frame and clamp plate.
3. Fasten with carriage bolts and wing nuts.
Description
• Follow cable tray manufacturer’s and cable
manufacturer’s instructions when pulling cable
in tray.
• Read and understand instruction manual
included with cable puller.
Failure to observe these warnings could result in
severe injury or death.
Tray-type Pulling Setup
WRONG WAY
RIGHT WAY
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
