To Next PageTo Next Page
Need help?Do you have a question about the Greenlee DM-200A and is the answer not in the manual?
General| Brand | Greenlee |
|---|---|
| Model | DM-200A |
| Category | Multimeter |
| Language | English |
Details the capabilities and features of the Greenlee DM-200A, DM-210A, and DM-510A digital multimeters.
Explains the meaning of the safety alert symbol and hazard classifications like DANGER, WARNING, CAUTION.
Details risks from moisture, exceeding voltage limits, and operating with an open case during use.
Covers fuse protection, circuit precautions, and warnings against self-repair and environmental exposure.
Identifies key parts of the multimeter including the display, selector, and input terminals.
Explains the various symbols and indicators shown on the multimeter's LCD screen.
Details the functions of basic buttons like SELECT, RANGE, HOLD, REL, Hz, and EF.
Covers Automatic Power Off feature and methods for Electric Field Detection (EF).
Explains specialized modes like AutoCheck™, MAX/MIN recording, and Crest Capture.
Differentiates between RMS value and average-responding vs. true RMS measurement methods for AC signals.
Guides for installing the optional software and connecting the interface cable to the meter and PC.
How to set the selector and use the settings table for performing measurements.
Recommends testing on known circuits and basic troubleshooting steps.
Procedures for performing frequency, EF, capacitance, and temperature measurements.
Usage details for the AutoCheck™ mode for automatic ACV, DCV, resistance, and continuity.
Illustrates the correct setups for performing voltage and current measurements.
Illustrates setups for resistance, continuity, capacitance, and diode tests.
Illustrates setups for temperature measurement and EF detection.
Specifies accuracy for voltage, resistance, diode, and continuity measurements.
Specifies accuracy for current and line level frequency measurements.
Details accuracy for logic level frequency and EF detection.
Specifies accuracy for capacitance, temperature, AutoCheck™, and recording functions.
Covers display, sampling rate, noise rejection, and operating conditions.
Details protection features and measurement category definitions for safety.
Explains Measurement Categories I, II, III, and IV for insulation coordination and safety.
States ISO 9001 certification and NIST traceability for the instrument.
Step-by-step guide for replacing the multimeter's batteries and fuses.
Guidelines for cleaning the multimeter case properly.
Outlines the terms and conditions of the lifetime limited warranty for the product.
