Troubleshooting Guide for Greenote GSC50
1）My vacuum has low suction or no suction at all？
If the suction power of your hoover has decreased significantly after a
period of use. This may be caused by a blockage inside the machine that
has not been cleaned for a long time.
Turn vacuum off and remove floor nozzle from wand. Remove soft roller
using eject tab on left side of nozzle.
Check where hair tangled :
1. Check your floor brush head
2. Check your brush room
3. Check your brush connections
4. Checking the connection of telescopic tube
Solution:
Try using a long hook or chopstick to dig out any blockages that have
become entangled in the machine, or tap down to guide the blockage
out.
To Next Page
Need help?
General
