To Next PageTo Next PageWhat to do if my GreenWorks Commercial CZ60R24X will not start?
If your GreenWorks Commercial Lawn Mower doesn't start, first ensure the key fob is correctly in place. Next, check the battery connection in the back battery compartment and verify the battery is fully charged. Finally, make sure that all circuit breakers are not tripped.
Why is my GreenWorks Commercial Lawn Mower cutting height uneven?
Uneven cutting height on your GreenWorks Commercial Lawn Mower can occur for several reasons. The blades may not be sharp, so try sharpening them. A cutting blade might be bent, in which case you should install new cutting blades. Check if the deck is level and adjust it if necessary. Ensure the anti-scalp wheel is correctly set by adjusting its height. Clean the underside of the deck if it's dirty. Adjust air pressure and ensure even pressure between tires.
What to do if there is abnormal vibration in my GreenWorks Commercial CZ60R24X?
Abnormal vibration in your GreenWorks Commercial Lawn Mower can be due to several factors. Check if the cutting blades are bent or unbalanced and install new ones if needed. Also, verify that the blade mounting bolt is not loose and tighten it if necessary.
General| Power Source | Battery |
|---|---|
| Motor | Brushless |
| Deck Material | Steel |
| Voltage | 82 V |
| Drive System | Rear Wheel Drive |
| Self-Propelled | Yes |
| Cutting Width | 60 inches |
| Cutting Height | 1.5 to 5 inches |
Provides general information about the manual and its applicability to specific mower models.
Illustrates and lists the main components of the mower for identification.
Describes the functions and layout of the mower's control panel and its indicators.
Details the function, installation, and safety precautions related to the ROPS.
Explains the function of the ETO socket for powering accessories.
Covers essential pre-operation checks and adjustments, including seat and deck height.
Provides detailed instructions on starting and driving the mower, including controls and safety.
Offers specific guidance and warnings for operating the mower on slopes safely.
Outlines crucial safety precautions related to the mower's electrical system and battery.
Covers information on battery maintenance, charging procedures, and charger recommendations.
Explains the functions and information provided by the mower's digital display.
Details specific error codes related to the display screen and CAN communication.
Lists error codes associated with the Battery Management System (BMS) and their resolutions.
Provides a list of error codes for the battery charger and recommended actions.
Lists error codes for the right wheel motor controller and troubleshooting guidance.
Lists error codes for the left wheel motor controller and troubleshooting guidance.
Lists error codes for the left blade motor controller and troubleshooting guidance.
Lists error codes for the middle blade motor controller and troubleshooting guidance.
Lists error codes for the right blade motor controller and troubleshooting guidance.
Lists error codes for the attachment controller and troubleshooting guidance.
Details how to inspect, remove, and install mower blades for optimal cutting.
Specifies the recommended tire pressure for proper mower operation and handling.
Provides critical torque specifications for wheel nuts and blade bolts to ensure safety.
Covers inspection and maintenance of the seat belt system for operator safety.
Describes inspection and care for the Roll Over Protective Structure (ROPS) to maintain its protective function.
Provides instructions for maintaining the battery pack to ensure optimal life and performance.
Offers general guidelines and important safety notes for performing service and repairs on the mower.
Explains regulations and requirements for transporting lithium-ion batteries.
Guides the user on safely loading and securing the mower for transport.
Provides instructions for cleaning the machine and preparing it for storage.
Specifies the conditions and duration for which the mower is warranted.
Identifies who is authorized to perform warranty service on the product.
Lists exclusions and items not covered under the product's warranty.
Provides legal disclaimers regarding implied warranties and their limitations.
Outlines limitations on remedies available to the customer in case of product failure.
Specifies the timeframe within which warranty claims must be initiated.
States that the written warranty constitutes the entire agreement regarding warranties.
Details the owner's obligations for product maintenance and safe operation.
Explains how risks of product failure are allocated between the manufacturer and the owner.
Instructs owners on how to register their product to activate warranty coverage.
