GREER Company MICROGUARD 434 Calibration Manual

GREER COMPANY
GREER COMPANYGREER COMPANY
GREER COMPANY
Crane Systems
Crane SystemsCrane Systems
Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
12
OF
39
COMMAND 02 ZERO SENSOR
COMMAND 02 ZERO SENSORCOMMAND 02 ZERO SENSOR
COMMAND 02 ZERO SENSOR
The Command 02 ZERO SENSOR permits the calibration of the zero of most analog sensors. Two sensors
can be zeroed using this Command. Each sensor is allocated a number that corresponds to the input to which
it is connected in the system.
THESE SENSORS INCLUDE:
1. Boom extension sensor, Analog input 2.
2. Boom angle sensor, Analog input 3.
The swing sensor has its own routine and is calibrated using Command 04.

GREER Company MICROGUARD 434 Specifications

General

Brand	GREER Company
Model	MICROGUARD 434
Category	Monitor
Language	English