Need help?Do you have a question about the Grillo 11500 and is the answer not in the manual?
Ensure machine readiness by checking manual, labels, surroundings, safety systems, and fasteners.
Follow guidelines for safe use, including personal protection, avoiding hazards, and proper machine handling.
Use original parts and replace worn blades promptly for safe and efficient operation.
Locate the machine's serial number on the nameplate for service and parts orders.
Details engine types, clutch, gearbox, speeds, PTO, safety devices, handlebar, tiller, dimensions, and weight.
Steps for initial setup: check for transit damage, attach spur, covers, foot, and fill engine oil.
Procedure for starting the engine, including throttle, choke, and safety device engagement.
Engaging the clutch and gear, then releasing the clutch to move the machine.
Steps to stop the machine safely, including throttle, gear, and fuel cock.
Periodically remove dust guards and clean the tiller shaft area for optimal performance.
Perform cleaning, oil changes, and blade maintenance for seasonal storage.
Provide machine serial number when ordering spare parts from the manufacturer.
Information on single-share and 180° roll-over ploughs for tilling and furrowing.
Details on the adjustable furrower for tracing sowing and irrigation furrows.
Instructions for fitting and removing the irrigation pump to the top shaft.
Instructions for fitting the sprayer pump to the rotovator top shaft.
Description of ratchet hubs for facilitating trailer use and acting as differentials.
Information on the small trailer accessory for light farm transport work.
Instructions for starting, reversing, and stopping the machine using the normal clutch lever.
Instructions for engaging speed and stopping the machine using the inverted clutch lever.
Detailed list of controls and components shown in figures 1/A and 2/A.
To Next Page
General
