Gritomatic HAPSTONE - Standard Configuration; Setup Instructions

www.gritomatic.com
- Metal pivot unit with PTFE insert provides smooth shaft movement and requires no
lubrication or cleaning
- Spring for quick changes to the sharpening stone
- Stopper rings to limit the movement of the horizontal shaft
- Wooden handle to make time-consuming work a little easier
2. STANDARD CONFIGURATION
- Hapstone V7 knife sharpener (disassembled) 1 pc.
- Black marker 1 pc.
- Sharpening stone set 1 pc.
- Manual 1 pc.
- Carton box 1 pc.
3. SETUP INSTRUCTIONS
Attach the T-shaped supporting leg to the
base of the knife sharpener and secure
with 2 thumb screws. The thumb screws
of the T-shaped supporting legs should
be tightened only when the sharpener is
positioned on the surface.
Install the pivot rod on the back side of the
base, as shown in the gure. Secure all
thumb screws.