Model G0755 (Mfg. Since 1/13)
-27-
SECTION 5: ACCESSORIES
ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
Figure 30. ISO 68 and ISO 32 machine oil.
T23962
T23963
High Pressure Oil Cans
H7616—Plastic Nozzle
H7617—Flexible Plastic Nozzle
Whether you are lubricating cutting tools or main-
taining machinery in top operating condition, you
will appreciate these High Pressure Oil Cans.
Each can holds 5 ounces of oil and has a trigger-
activated, high-pressure pump.
Figure 31. High Pressure Oil Cans.
H7616
H7617
G1075—52-PC. Clamping Kit for
1
⁄2" T-Slots
This clamping kit includes 24 studs, 6 step block
pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. The rack is slotted so it can be
mounted close to the machine for easy access.
Figure 28. G1075 52-PC. Clamping Kit.
G7066—5" Tilting/Swiveling Milling Vise
H7576—Precision Self-Centering Vise
Figure 29. Specialty milling vises.
G7066
H7576
To Next Page
Loading...
Need help?
General
