Do you have a question about the Groeneveld Greensight Active Safety and is the answer not in the manual?
Lists the main hardware components of the Greensight system, including control unit, sensors, and optional accessories.
Describes how the detection area is divided into three customer-configurable zones for obstacle detection.
Explains how sensor mounting height determines detection height, width, and minimum bottom clearance.
Covers optional top corner and side detection sensors that extend the system's coverage.
Details optional alarm horns, external lights, and cameras for enhanced system functionality and alerts.
Explains the signal output function for activating external accessories when an object is detected.
Outlines the automatic self-test process initiated upon vehicle start or gear selection.
Shows system indications during self-test and error conditions via monitor lights, sounds, and indicator lights.
Explains how the system alerts the driver using distance-dependent visual and audible signals.
Details visual and audible alerts for different distance zones (>3m, Zone 1, Zone 2, Zone 3) and states on the monitor.
Details visual and audible alerts for different distance zones using in-cab display lights or external indicator lights.
Lists common error codes and their explanations for identifying system malfunctions.
Covers recommended cleaning procedures for the Greensight system components, especially sensors and cameras.
Discusses factors like dirt, snow, ice, and extreme temperatures affecting system performance and accuracy.
Details factory settings for detection zones, including distances for warning and danger zones.
Provides weight details for individual system components like the control unit, sensors, camera, and monitor.
Lists compliance with DIN standards and relevant EMC certifications for the system.
| Type | Active Safety System |
|---|---|
| Technology | Camera |
| Alert Type | Audible and visual |
| Application | Commercial Vehicles |
| Connectivity | CAN Bus |