Grotime Essentials DAINTY COT 30216 - Page 3

STEP 1
Assemble fi xed side to ends
using 4 x 60mm bolts
STEP 2
Assemble cot base
using 4 x 60mm bolts
x1
x2
x4
60mm bolts
End panel
Do not tighten bolts at this stage
Do not tighten bolts at this stage
Choose high or
low position for
mattress base
x1
x4
60mm bolts
HIGH:
Newborn level
LOW:
Infant level
WARNING
TO PREVENT FALLS, THE MATTRESS
BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION
BEFORE CHILD CAN SIT UP.
! !
Fixed side
x4
Barrel Nut
x4
Barrel Nut
Cot base