WWW.GFWORLDWIDE.COM | +1 (208) 664-9291
• Pump mounting plate upgraded to heavy-duty stainless
steel
• Stainless steel water pump upgrade (B4)
4" STAINLESS STEEL GRAVITY DUMP BAR
• Width of tank, at rear
• 4" schedule 40 pipe with 3/4" holes on 6" centers
• Operated from cab
HYDRAULIC OPERATED SIDE SPRAY
• Side spray (2) located at upper quadrants - front of tank
(2) HYDRAULIC REWIND HOSE REELS
• (2) water hose reel with 100' x 1-1/2" hose and adjust-
able nozzle
• Mounted on the rear of the machine
• Includes manual in-line shut-off (isolator) valve
• Includes addition of high idle switch box
• Air blow-down and control valve for hose draining
NITRO WATER CANNON
• Hard-wired joystick control operation
• 500 GPM adjustable nozzle
• Includes automatic drain feature to eliminate standing
water in Monitor pipe
(2) 24V LED UTILITY LIGHTS (USES BACKUP
LIGHTS WITH DEDICATED SWITCH)
• (2) 24V LED rear-mounted sealed-beam work lights
• Include control switch/circuit protection in tractor cab
• TYRI 1313 or similar 7,000 Lumens
WATER LEVEL INDICATOR ELECTRIC
• In-cab water level indicator
AUTOMATED GREASING SYSTEM
• Groenwald Beka Twin 3.1 Automated Greasing System
with 8-liter pump, in-cab display, and auxiliary grease
points on Cat 631K water pull with 34 grease points
• Optional add-on, Groenwald Twin 3.1 24V , 8L auto-
mated grease pump F605338
• Optional add-on Groenwald Twin system parts kit (large)
F198737
INTERIOR COATING
• Interior coating per spec provided by Skip Vernon CLT Inc
• NW Sandblast & Paint to sandblast the 12,000-gallon
tank interior to the product preparation specication
• Sandblast the interior of the tank to an SSPC-SP10 near
white metal
• Apply two coats of PPG Amerlock 2 Epoxy @ manufac-
turer’s recommendation of 4-8 mils dft per coat
• Apply caulking on all skip welds prior to applying the
second coat of epoxy (no additional cost)
• Have hold points for outside inspection QA after blast,
each coat of epoxy and caulking
6
SPECIFICATIONS
To Next Page