Grow Panel Series - Set-Up; Limited Warranty; Fixture Housings Warranty; LED Modules Warranty

To Next Page

To Previous Page

LED Grow Lights for Commercial & Home Horticulture

customerservice@growillumination.com or 727-300-9615

Product manual subject to change without notice. REV 10422

SET-UP:

1. Unbox and carefully lay light on flat area or table. Attach the 4 clips on the wire hangers into

corresponding 4 holes on the edge of the light.

2. Clip the carabiner onto adjustable rope hanger, hang up the light onto the grow tent or

other hanging point and then adjust to an appropriate height.

3. Plug the light in and adjust the output power with the dimmer.

Note: Image below may not be an exact representation of model you have.

BOX CONTENTS:

• P110, P220, or P440 Light

• One ratchet hanger

• One 4-way cable system

NOTE:

Additional information can be found on our website or call us, and we will be happy to help you.

LIMITED WARRANTY

Grow Illumination warrants to the original purchaser the following products manufactured in accordance to our specifications

against defective material or workmanship, but not against damage caused by accident, abuse, installation in violation of local

codes, faulty installation, fixture misapplication, acts of nature, alteration of product, and improper operation or improper

installation.

FIXTURE HOUSINGS:

Fixture, including housing but excluding driver and LED modules: For a period of five (5) years from date of purchase.

LED MODULES:

LED Modules, For a period of five (5) years from date of ship date as indicated by the date from your invoice for each product.