To Next PageTo Next PageWhat to do if Growatt ARK 5.1-25.6XH-A1 Camera Accessories show charge over voltage protection?
If the Growatt Camera Accessories indicate a charge over voltage protection, there is no immediate safety threat. Stop charging the device and wait for the battery system to automatically resolve the fault. This occurs when a single cell voltage exceeds the protection threshold.
What to do if Growatt Camera Accessories experience an external RS485 communication failure?
If Growatt Camera Accessories experience an external RS485 communication failure, it means there is a communication loss between the hybrid inverter and the battery system. There is no safety threat, but you should stop using the battery. First, check if the hybrid inverter and battery communication terminal are well connected. If the inverter and pack still cannot communicate after confirming the connection, contact your installer to repair the battery.
Why is the ALM light flickering on my Growatt ARK 5.1-25.6XH-A1?
The ALM light might be flickering on your Growatt Camera Accessories because a single cell voltage is below the threshold for under-voltage protection. This indicates an over-discharge risk, so you should stop discharging the device and arrange for it to be recharged.
General| Brand | Growatt |
|---|---|
| Model | ARK 5.1-25.6XH-A1 |
| Category | Camera Accessories |
| Language | English |
Describes the system's purpose and application.
Details the physical look of the system components.
Explains how the system operates and its key functions.
Outlines fundamental safety rules and Growatt's responsibility.
Provides detailed safety measures for environmental and operational aspects.
Lists and explains various warning symbols used in the document.
Specifies conditions for storing the battery system safely.
Covers regulations and precautions for transporting the battery pack.
Outlines general conditions for installing the battery system.
Lists the necessary tools for the installation process.
Provides step-by-step instructions for installing the system.
Explains the pin assignments and definitions for communication ports.
Steps to safely power on the battery system.
Precautions and checks before performing maintenance.
Procedures for replacing key system components.
Guides on identifying and resolving system errors.
Detailed technical specifications for the ARK XH-A1 system.
Specific technical details for the high voltage controller.
Specific technical details for the ARK 2.5H-A1 battery pack.
Method for calculating the rated capacity of the battery system.
Lists battery system models and their recommended charge instructions.
Explains the meaning of LED indications for system status across multiple pages.
