10 Decommissioning
10.1 Dismantling the Inverter
10.2 Packing the Inverter
10.3 Storing the Inverter
10.4 Disposing of the Inverter
11 Growatt Warranty
Please refer to the warranty card.
Do not dispose of faulty inverters or accessories together with
household waste. Please accordance with the disposal regulations for
electronic waste which apply at the installation site at that time. Ensure
that the old unit and, where applicable, any accessories are disposed of
in a proper manner
Store the inverter in a dry place where ambient temperatures are always between -22℉to
149℉（-30℃ to 65℃）.
If possible, always pack the inverter in its original carton and secure it with tension belts.
If it is no longer available, you can also use an equivalent carton. The box must be
capable of being closed completely and made to support both the weight and the size of
the inverter.
1.Disconnect the inverter as described in section 6.
2.Remove all connection cables from the inverter.
3.Screw off all projecting cable glands.
4.Lift the inverter off the bracket and unscrew the bracket screws.
Danger of burn injuries due to hot enclosure parts!
Wait 20 minutes before disassembling until the housing has cooled down.
CAUTION
Max. recommended
PV power(for
module STC)
No. of PV strings per
MPP trackers
Max. input current
per MPP trackers
Max. short-circuit
current per MPP
trackers
Input/Output Data (Battery)
Battery Capacity per
module
12.1 Specification
Technical Data 12
53
54
To Next Page
Loading...
