KM 251 en
56 15.720148-V1.0
EC Declaration of Conformity (Translation)
in the context of EC machinery directive 98/37/EC,
EC directive for EMC 89/336/EEC
The design of the product range
Piston Diaphragm Dosing Pumps KM 251
has been developed, constructed and manufactured in compliance with
EC directives 98/37/EC and 89/336/EEC at the sole responsibility of
ALLDOS Eichler GmbH
Reetzstr. 85
D-76327 Pfinztal (Söllingen), Germany
The following harmonized standards have been applied:
• EN 292-1:1991/ EN 292-2:1991 + A1:1995
• EN 809:1998
• EN 61000-3-11:2000 *
• EN 61000-6-2:2001
• EN 61000-6-4:2001
* with Etron Profi electronics
Any modifications made to the pump without our approval will invalidate this declaration.
When installing the pump in a machine or system ensure that the machine or system into
which it is installed complies with the provisions of the directives. The pump must not be
started until this has been established.
Pfinztal, 25/10/02
Ewald Diesslin pp Klaus Müller
Managing Director Construction and
Development
To Previous Page
Loading...
