Grundfos CIM 200 - Pump 2 Register Block

English (GB)
36
9.9 Pump 2 register block
All register values are read-only, and 0xFFFF indicates that the
data value is not available.
Unless otherwise stated, the data type used for counters and
scaled values is always an unsigned integer.
Address Register name Scale Description
00451
Pump2Status
Bit 0: Presence
Bool
Presence of pump.
0 = Not present
1 = Present.
Pump2Status
Bit 1: Running
Bool
Running state of pump.
0 = Not running
1 = Running.
Pump2Status
Bit 2: MonitoringFault
Bool
Fault state of pump monitoring devices.
0 = No fault
1 = Fault in auxiliary equipment or sensors.
Pump2Status
Bit 3: Warning
Bool
Warning state of pump.
0 = No warning
1 = Warning.
Pump2Status
Bit 4: Alarm
Bool
Alarm state of pump.
0 = No alarm
1 = Alarm.
Pump2Status
Bit 5: IO111Present
Bool
Presence of auxiliary equipment IO 111.
0 = Not present
1 = Present.
Pump2Status
Bit 6: IO111Fault
Bool
Fault state of auxiliary equipment IO 111.
0 = No fault
1 = Fault.
Pump2Status
Bit 7: MP204Present
Bool
Presence of auxiliary equipment MP 204.
0 = Not present
1 = Present.
Pump2Status
Bit 8: MP204Fault
Bool
Fault state of auxiliary equipment MP 204.
0 = No fault
1 = Fault.
Pump2Status
Bit 9: CUEPresent
Bool
Presence of auxiliary equipment CUE.
0 = Not present
1 = Present.
Pump2Status
Bit 10: CUEFault
Bool
Fault state of auxiliary equipment CUE.
0 = No fault
1 = Fault.
Pump2Status
Bit 11: PumpDisabled
Bool
Enabled/disabled state of pump.
0 = Enabled
1 = Disabled (e.g. for temporary maintenance).
00452 Pump2ControlSource enum
Control source of pump.
0 = Auto
1 = Switch
2 = Display
3 = Remote-controlled by bus.
00453 Pump2ConnectionType enum
Pump connection type.
0 = The pump is controlled from the CU 36X output relay.
1 = The pump is controlled from the IO 351B output relay.
2 = The pump is controlled from the CU 36X and VFD.
3 = The pump is controlled from the IO 351B and VFD.
00454 Pump2OperatingTimeHI
1 minute Total operating time.
00455 Pump2OperatingTimeLO
00456 Pump2TimeToServiceHI
1 minute Time to next service.
00457 Pump2TimeToServiceLO
00458 Pump2OperatingTimeYesterday 1 minute Operating time yesterday.
00459 Pump2OperatingTimeToday 1 minute Operating time today.
00460 Pump2LatestOperatingTime 1 second Operating time last time it was operated.
00461 Pump2StartCounterHI
Unscaled Total number of pump starts.
00462 Pump2StartCounterLO
00463 Pump2StartCounterYesterday Unscaled Total number of pump starts yesterday.
00464 Pump2StartCounterToday Unscaled Total number of pump starts today.
00465 Pump2StartsPerHour Unscaled Number of pump starts within the last hour.
00466 Pump2Flow 0.1 litre/s Calculated average or measured pump flow.
00467 Pump2LatestFlow 0.1 litre/s Latest calculated/measured flow (capacity).
Pumpland.ru