Grundfos CIM 250 - Data Log Index Register Block

English (GB)
49
9.19 Data log index register block
This is an index area for the configurable data log. The log data
index registers are read-only.
See section 11.3 Reading the configurable data log series for
detailed information on how to read the configurable log series.
By default the configurable logs are not set up. This can only be
done with a PC Tool or via the CU 36X control panel. For further
information, see installation and operating instructions for
Dedicated Controls.
… indicates variable register address.
Address Register name Scale Description
07001 NoOfLogSeries Unscaled Number of available log series [0; 64].
07002 LogSeries1ItemNo Unscaled
Log series 1 item number.
See section 11.3 Reading the configurable data log series.
07003 LogSeries1RegAddr Unscaled Register start address of log series 1.
07004 LogSeries1SamplingTime 1 second Time period between samples in log series 1.
07005 LogSeries1NoOfSamples Unscaled Number of samples in log series 1, N
1
.
07006 LogSeries2ItemNo Unscaled
Log series 2 item number.
See section 11.3 Reading the configurable data log series.
07007 LogSeries2RegAddr Unscaled Register start address of log series 2.
07008 LogSeries2SamplingTime 1 second Time period between samples in log series 2.
07009 LogSeries2NoOfSamples Unscaled Number of samples in log series 2, N
2
.
… LogSeries#ItemNo Unscaled
Log series # item number.
See section 11.3 Reading the configurable data log series.
… LogSeries#RegAddr Unscaled Register start address of log series #.
… LogSeries#SamplingTime 1 second Time period between samples in log series #.
… LogSeries#NoOfSamples Unscaled Number of samples in log series #, N
#
.
07254 LogSeriesLItemNo Unscaled
Log series "L" item number (last series).
See section 11.3 Reading the configurable data log series.
07255 LogSeriesLRegAddr Unscaled Register start address of log series "L".
07256 LogSeriesLSamplingTime 1 second Time period between samples in log series "L".
07257 LogSeriesLNoOfSamples Unscaled Number of samples in log series "L", N
L
.
07258 LogSeriesEndMark Unscaled End mark to end the index. Is always 0.
Pumpland.ru