English (GB)
74
An example is shown below
Event log
Hour log
• The "Hour log" button opens the display for showing the hour
log. The table below illustrates the structure of the data in the
Modbus registers and a way of visualising them.
ID Code Description Source Type Time
341 192 Overflow System Alarm appearing 05-08-2008 09:25
342 192 Overflow System Alarm disappearing 05-08-2008 11:09
343 222 Time for service, mixer Mixer Warning appearing 07-08-2008 02:38
344 6 Motor insulation resistance low Pump 2 Warning appearing 11-08-2008 08:24
The time stamp is in Unix time format. In the display
example, it has been converted to a human-readable
format.
Data
Hour
Registers
1 2 3 … 71 72
Pit overflow time [min.] 0 4 6 0 0 02001-02072
Number of pit overflows 0 1 3 0 0 02073-02144
Overflow volume [0.1 m
3
] 0 12 34 0 0 02145-02216
Specific energy [Wh/m
3
] 240 262 198 308 287 02217-02288
Pumped volume [m
3
] 67 69 72 45 23 02289-02360
Energy consumption [0.1 kWh] 342 456 514 178 123 02361-02432
Operating time (two pumps
operating simultaneously) [min.]
8 20 48 0 4 02433-02504
Pump 1, operating time [min.] 23 56 60 14 12 02793-02864
Pump 1, number of starts 4 1 1 4 3 02865-02936
Pump 1, average flow [0.1 l/s] 452 468 458 433 446 02937-03008
Pump 1, average current [0.1 A] 252 248 241 240 242 03009-03080
Pump 2, operating time [min.] 21 52 63 15 11 03081-03152
Pump 2, number of starts 7 2 1 2 3 03153-03224
Pump 2, average flow [0.1 l/s] 458 451 471 438 444 03225-03296
Pump 2, average current [0.1 A] 250 239 240 229 240 03297-03368
To Next Page
Loading...
