Grundig 01M-GDB1030-4620-02 - Automatic Time Update Configuration

31
ENGLISH
4 Confirm the option »Set 12/24
hour« by pressing »OK/SCAN«.
5 Select the desired clock format (12 or
24 hours) by pressing »r« or »e« and
confirm by pressing »OK/SCAN«.
6 Press and hold »MENU/INFO« to
end the display.
Updating the time – automati-
cally
The device will normally update the
time automatically, when a time signal
is received. You can select from which
source (DAB or FM) the update starts or
you can disable this function.
1 Open the menu with
»MENU/INFO«.
2 Select the option »System« with
»r« or »e« and confirm by pressing
»OK/SCAN«.
3 Confirm the option »Time« by press-
ing »OK/SCAN«.
– Display: »Set 12/24 hour«.
4 Select the option »Auto update«
with »r« or »e« and confirm by press-
ing »OK/SCAN«.
5 Select the desired source (Any = DAB
and FM, or DAB or FM) from which
the update starts with »r« or »e«; or
select the option »No update«, if you
want to disable the update.
6 Press »OK/SCAN« to confirm the set-
ting.
7 Press and hold »MENU/INFO« to
end the display.
Updating the time – manually
1 Open the menu with
»MENU/INFO«.
2 Select the option »System« with
»r« or »e« and confirm by pressing
»OK/SCAN«.
3 Confirm the option »Time« by press-
ing »OK/SCAN«.
– Display: »Set 12/24 hour«.
4 Select the option »Set Time/date«
with »r« or »e« and confirm by press-
ing »OK/SCAN«.
5 Enter the time and date using »r«
oder »e« respectively and confirm by
pressing »OK/SCAN«.
6 After the last input, »Time Saved«
appears.
7 Press and hold »MENU/INFO« to
end the display.
SPECIAL FUNCTIONS -----------------------------