ENGLISH
32
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Setting the date and time
Automatic setting
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal.
1 Select the line
»Time Adjustment« with »
C
«,
then select the option
»Manual« with »
B
«
or
»
A
«.
– The lines
»Time Zone« and »Daylight Sav-
ing
« are active.
2 Select the line
»Time Zone« with »
C
« and
press
»OK« to confirm.
– The
»Select Time Zone« menu appears.
3 Select the appropriate time zone with
»
B
«,
»
A
«, »
C
« or »
D
« and press »OK« to con-
firm.
4 Select the line
»Daylight Saving« with
»
C
« and use »
B
« or »
A
« to set the option
»Auto«, »Off« or »On«.
5 Press
»M« to finish the setting.
Manual setting
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1 Select the line
»Date & Time« with »
C
« or
»
D
« and press »OK« to confirm.
2 Select the line
»Auto« with »
C
« or »
D
«
and press
»OK« to confirm.
– Date and Time will be updated
automatically;
or
3 Select the input box with
»
C
« or »
D
«, enter
the data for Date and Time with
»1...0«
and press
»OK« to confirm.
Timer settings
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line
»Sleep Timer« with »
C
« or
»
D
«.
2 Enter the switch-off time with
»
B
« or »
A
«.
Note:
7
To switch off the function, use »
B
« or »
A
« to
set the switch-off time to
»Off«.
3 Press
»M« to end the set-up.
Switch-on timer
In the »Auto On« menu you can enter a switch-
on time for the television. After the preset time
has elapsed, the television switches on from
standby – at the preselected volume and the pre-
selected television channel.
1 Select the line »
Auto On
« with
»
C
« or »
D
«
and press »OK« to confirm
.
2 Select the line »Mode« with
»
C
« or »
D
«
and
use
»
B
« or »
A
«
to select when the television
should switch on.
3 Select the line
»Input Source« with
»
C
« or
»
D
«
and use
»
B
« or »
A
«
to select the input
source.
4 Select the line
»Service Type« with
»
C
«
or »
D
«
and use
»
B
« or »
A
«
to select the
preferred option (ATV, DTV, Radio or DATA).
5 Select the line
»Channel« with
»
C
« or »
D
«
and use
»
B
« or »
A
«
to select the preferred
channel.
Note:
7
The line
»Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
To Next Page
Loading...
