Grundig 32 GEH 6600B - Displaying Signal Information

71
ENGLISH
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Displaying signal information
(only for digital television channels)
1 Press »MENU« to open the menu.
2 Press »
V « or » Λ « to select the »Channel«
menu and press »>« to confirm.
– »Channel« menu is now enabled.
3 Select »Signal Information« using »
V « or
»
Λ « and confirm with »OK«.
– »Signal Information« menu will be
displayed.
Notes:
7
Signal information changes depending on
the current source.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
4 Press »EXIT« to finish the screen display.