Grundig 32 GFB 6825 - Switching on and off; Selecting the Operating Mode; Selecting Channels; Selecting Stations from Lists

31
ENGLISH
TV OPERATION – BASIC FUNCTIONS
---------------------------------
Switching on and off
1 Press »8«, »1…0« or »P+« or »P-« to
switch on the television from standby mode.
2 Press »
8« to switch the television to standby.
Selecting the operating mode
You can select the menu operating mode of
your television. »Advanced Mode« contains all
setting whereas »Simple Mode« is an abridged
version that allows you to make quick settings.
1 Press »MENU« button.
2 Press »

« (blue) button to change the
operating mode.
Selecting channels
1 Use »1…0« to select channels directly.
2 Select channels step by step with »P+« or
»P-«.
3 Open the channel list by pressing »OK«,
select the channel list by pressing »
<
« or
»
>
« and confirm with »OK«, then close the
channel list with »EXIT«.
Notes:
7
Programme information for the following
days an be called up with »
Λ «.
7
Switch to radio channels by calling up
the channel list with »OK«, press »

«
(blue), use »
V « or » Λ « to select the option
»Radio«. Select radio channels with »
<
« or
»
>
« and confirm with »OK«.
7
Switch back to TV channel lists by calling
up the channel lists again with »OK« , press
»

« (blue), using »
V « or » Λ « to select
the option »Digital« and confirm with »OK«.
7
To save energy, you can turn off the screen
in “Radio mode” (see “ADVANCED SET-
TINGS” on page 67).
Selecting stations from lists
You can select stations from various lists, (e.g.
ALL, FAV1 - FAV4).
1 Press »FAV« to recall the favorite list menu.
– »Favorite« menu is displayed.
2 Select the favorite list with »
V « or » Λ « and
open it with »OK«
3 Select the channel with »
<
« or »
>
« and
press »OK« to confirm.
4 Press »EXIT« to exit the channel list.
Selecting AV channels
1 Open »Input Source« menu with » «.
2 Select the desired AV channel position with
»
<
« or »
>
« and confirm with »OK«.
3 Use »1…0« to switch back to the television
channel.
Note:
7
The AV preset descriptions can be changed.
See “Settings” section on page 26.
Adjusting the volume
1 Adjust the volume with »– o +«.
Muting
1 Use »p« to switch the sound off (mute) and
to switch it on again.
Displaying information
Information about each television program is
shown automatically at every change of chan-
nel.
1 Display information, press »?« repeatedly.
– The display disappears automatically
after a short while.