Grundig 37 VLC 6110 C - Special Settings; Tuning the television channels by entering the channel numbers; Changing stored analogue channels

47
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« with »
V «
or »
Λ « and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
V « or
»
Λ « and press »OK« to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1 In the » PROGRAME TABLE « menu, select the
television channel to be deleted with
» V «,
»
Λ «, »
<
« or »
>
« and press »

« (red) to con-
firm.
2 Press »

« (yellow) to confirm the deletion
process.
Note:
7
»

« (blue) allows all television channels
to be deleted.
3 Press »

« (green) to confirm the deletion
process.
Tuning the television channels by
entering the channel numbers
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« with »
V «
or »
Λ « and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line » Analogue Manual Tuning«
with »
V « or » Λ « and press »OK« to confirm.
– The menu appears.
Program No
TSystem
Band
Channel
Fine Tuning
1
INSTALLATION
ANALOGUE MANUAL TUNING
BG
C
2
0
Auto Previous Auto Next Store
48.25 MHz
4 Select the line »Program No« by pressing » V «
or »
Λ « and use »
<
« or »
>
« to save the preset.
5 Select »Band« by pressing »
V « or » Λ « and
use »»
<
« or »
>
« to choose between »S«
(special channel) or »C« (normal channel).
6 Select the line »Channel« with »
V « or » Λ « and
enter the channel number with »
<
« or »
>
« step
by step, or use »1…0« to enter it directly.
Notes:
7
The current system is displayed in the
»System« line. If the colour or sound is
not functioning properly, select the line
»System« with » V « or » Λ «. Use »
<
« or »
>
«
to select the preferred setting.
7
If fine tuning is necessary, select the line
»Fine Tuning« with » V « or » Λ « and use »
<
«
or »
>
« to make the setting.
7 Press »

« (blue) to save the setting.
Note:
7
If you wish to remedy other television
channels, repeat steps 4 to 8.
8 Press »
MENU« to end the setting.