Grundig 43 GFB 5945 - Lock Settings; PIN Code and Menu Locking

35
ENGLISH
1 Press »MENU« to open the menu.
2 Select the »LOCK« menu using »
<
« or »
>
«
and confirm your selection with »OK«.
– The »LOCK« menu is now enabled.
Move
LOCK
Back Select Exit
System Lock Off
Set Password
Channel Lock
Parental Guidance Off
Key Lock Off
Hotel Mode
Note:
7
Additional operations are explained in the
following sections.
Menu Lock
Using this function, you can lock »Auto. Tuning«,
»Programme Edit« and »Dish Antenna Setup«
so that they can only be accessed by entering a
PIN code.
1 In the »LOCK« menu, press »OK« and enter
the PIN code »0000« using »1...0« buttons
on the displayed password screen.
– The menu options are now enabled.
2 Select »System Lock« with »
V « or » Λ « and
confirm with »
<
« or »
>
«.
3 Activate the lock with »
<
« or »
>
«.
Note:
7
Select »Off« with »
<
« or »
>
« to disable the
menu lock.
4 Press »EXIT« to finish the setting.
LOCK SETTINGS
-----------------------------------------------------------------------------------------------
Changing the PIN code
Instead of the default code »0000«, you can
enter a personal code.
Please take note of your personal code.
Press »
V « or » Λ « to select the »Set Password«
and confirm with »OK«.
5 Use »1...0« to enter your current four-digit
PIN code.
– »Enter New Password« is now enabled.
6 Use »1...0« to enter your new four-digit
personal PIN code.
7 Use »1...0« to enter your personal PIN
code again.
8 Press »EXIT« to finish the setting.
Blocking a television channel
You can block individual television channels
which are not suitable for children using a
personal PIN code.
Note:
7
The »Menu Lock« must be »On« for the
programme lock to function.
1 In the »LOCK« menu, press »OK« and enter
the PIN code »0000« using »1...0« buttons
on the displayed password screen.
– The menu options are now enabled.
2 Select »Channel Lock« with »
V « or » Λ «
and confirm with »OK«.
– »Channel Lock« menu will be displayed.
3 Select the channel you want to block with
»
Λ « or » V « and press »

« (green).
–The channel will be marked.
4 Press »EXIT« to finish the setting.