Grundig 43 GFB 5945 - Manual Satellite Channel Search

ENGLISH
44
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Searching for digital television
channels from a satellite
manually
If a certain channel cannot be found with
automatic search, you can search it manually
by manual search function. You must enter all
parameters of the channel correctly. You can
obtain the current transponder information
from teletext page, satellite TV magazines or
Internet or you can search by selecting from the
transponder list that already exists in the TV.
1 Press »MENU« to open the menu.
2 Press »
<
« or »
>
« to select the »CHANNEL«
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
3 Select »Dish Antenna Setup« using »
V « or
»
Λ « and confirm with »OK«.
– »Dish Antenna Setup« menu will be
displayed.
4 Display the transponder list with »GUIDE«.
5 Press »

« (yellow) to add the transponder
in which you want to search manually.
6 Press »
V « or » Λ « to select the required
items and press »OK« to confirm.
Frequency
Enter the 5-digit channel frequency using
»1...0«.
Symbol Rate (Ks/s)
Enter the channel's symbol rate in 5 digits
using »1...0« buttons.
Polarity
Use »
<
« or »
>
« to select the channel
polarity as »V« or »H«.
7 Select the transponder you have added
using »
V « or » Λ « and confirm with »OK«.
– Transponder is marked with »✔«
8 Press »

« (blue).
– »Channel Search« menu will be
displayed.
9 Select »Channel Type« using »
V « or » Λ «.
Press »
<
« or »
>
« to select whether you
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scramble) or the both
(Free+Scramble).
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Settings«
option to »Network«.
10 Select »Service Type« using »
V « or » Λ «.
Press »
<
« or »
>
« to select whether you want
to search for only television channels (DTV),
only radio (Radio) or the both (All).
11 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes
depending on the number of television
channels received.
Note:
7
The search can be ended prematurely with
»MENU«.
12 Press »MENU« to end the setting.