3. To Set the 12 Hour or the 24 Hour
• Then press the “MEM” button again to change the current the 12 hour or the 24 hour.
• Press the “SET” button again and Continue with step 4.
The 12 hour or the 24 hour Setting
4. To Set Unit
• Then press the “MEM” button again to change the current unit.
• Press the “START/ STOP” button to save the current setting and turn off.
Unit Setting kPa & mmHg
You can stop setting anytime when you press the “START/ STOP” button to save the current
setting and turn off.
5. To Set User
The mark of a user will appear when pressing the “SET” button, then press the “SET” button again
to change the current user. Finally, press the “START/ STOP” button to confirm user and turn off.
871125208143.indd 8 14-03-18 14:53
To Next Page
Loading...