Grundig DKR 1000 - Automatic Time Update; Device Reset Procedure

37
ENGLISH
SPECIAL FUNCTIONS _________________________
or rotates the »OK« knob, short press the
»OK« to confirm.
7
Display: < Set date format* > and <
DD-MM-YYYY or MM-DD-YYYY >.
5 Select the desired Date format (DD-MM-YYYY
or MM-DD-YYYY) by short press the »TUNE
+ « or »TUNE - « button, or rotates the
»OK« knob, short press the »OK« to confirm.
Updating the time – automati-
cally
The device will normally update the time
automatically, when a time signal is received.
You can select from which source (DAB and/
or FM) the update starts or you can disable
this function.
1 In power on model, long press the »INFO/
MENU« button to open the menu.
2 Select the option < System > by short press
the »TUNE - « or »TUNE + « button, or
rotates the »OK« knob, short press the »OK«
to confirm.
- Display: < Sleep >.
3 Select the option < Time > by short press the
»TUNE - « or »TUNE +« button, or rotates
the »OK« knob, short press the »OK« to con-
firm.
- Display: < Set Time/Date >.
4 Select the option < Auto update > by short
press the »TUNE - « or »TUNE + « button,
or rotates the »OK« knob, short press the
»OK« to confirm.
- Display < Auto update * > and < Update
from Any/DAB/FM/No update >.
5 Select the desired source (e.g. Update from
Any) by short press the »TUNE - « or »TUNE
+ « button, or rotates the »OK« knob, short
press the »OK« to confirm. (Choose < No
update > if you want to disable the auto
time update function.
6 Long press the »INFO/MENU« button to
end the display.
Reset the Device
In some circumstances the device’s function
may hanging and need to reset. To reset the
device:
1 Unplug the 5.5mm DC plug of AC to DC
power adapter form the DC IN socket of the
device. Wait for few seconds;
2 Then re-plug the 5.5mm DC plug back to DC
INPUT socket to start up the device again;
3 The device should be working again normal-
ly, the power reset is done.