ENGLISH
38
If a fault occurs, first see whether you can
resolve the problem yourself. You might find
this overview useful.
CAUTION! Risk of injury!
Opening the device can cause injuries.
TROUBLESHOOTING _________________________
Fault Possible cause/action
No function - If the device has been disrupted by a thun-
derstorm, a static charge or another external
factor, follow this procedure to resolve the
problem: Disconnect the mains adapter and
then plug it in again.
No sound - The volume may be set too low or in mute
mode.
- In Bluetooth mode: Set the volume of the
external device to the maximum and then
control the volume using the kitchen radio.
No radio signal for
the time/no radio
reception
- If necessary, select another location to impro-
ve the radio signal for the time. Adjust the
wire antenna to optimize the radio reception.
No Bluetooth® connection - Take care to ensure that all settings have
been made correctly on all devices. The
Bluetooth® function may be deactivated on
the external device. Activate this, if necessa-
ry.
- Check whether the device to be connected is
switched on and is in search mode.
To Next Page
Loading...
