Grundig GR1000
DVD/Video combination
quick start guide
Please follow the instructions below and overleaf to
connect and play video cassettes and DVDs and CDs in
your DVD/VCR
Use two AA/MN1500/LR06 size batteries.
1
Insert batteries into the remote
control
All connections must be made with the power disconnected.
1. Connect an external aerial
(not supplied)
to the aerial socket
(marked IN) on the back of your DVD/VCR.
2. Connect one end of a RF lead to the aerial socket on your
TV (marked IN) and the other end to the aerial socket
(marked OUT) on the back of your DVD/VCR.
3. Connect one end of a SCART lead to the SCART socket
on your TV and the other end to the SCART socket
(marked TV RGB Composite) on the back of your
DVD/VCR.
2
Connecting with a RF and SCART lead
Connect your DVD/VCR to a TV using an RF (Coaxial) and SCART lead.
3
Connecting a satellite decoder
DVD/VCR
DVD/VCR
Satellite
decoder
TV
TV
External aerial
External aerial
All connections must be made with the power disconnected.
1. Connect an external aerial
(not supplied)
to the aerial socket
on the back of your satellite decoder.
2. Connect one end of a SCART lead to the SCART socket
on your satellite decoder (marked VCR SCART) and the
other end to the SCART socket (marked TV/RGB
Composite) on the back of your DVD/VCR.
3. Connect one end of a SCART lead to the SCART socket
on your TV and the other end to the second SCART socket
on your Satellite Decoder (marked TV SCART)
4. Connect one end of a RF lead to the aerial socket on your
satellite decoder and the other end to aerial socket
(marked IN) on the back of your DVD/VCR.
5. Connect one end of a RF lead to the aerial socket on your
TV (marked IN) and the other end to the aerial socket
(marked OUT) on the back of your DVD/VCR.
To Next Page
Need help?
General
