Need help?Do you have a question about the Grundig JW-6640MD and is the answer not in the manual?
General| Brand | Grundig |
|---|---|
| Model | JW-6640MD |
| Category | Home Lighting Accessories |
| Language | English |
Requires 3 AAA batteries. Ensure correct polarity and use as backup power.
Connect USB cable to adapter and product. Plug adapter into a power socket.
Set the current time by adjusting hour and minute values using +/- buttons.
Toggle between 12-hour and 24-hour format, indicated by AM/PM.
Re-enter time setting mode to adjust hour and minute values.
Adjust the display brightness level using the dedicated button.
Turn radio on/off. Auto-scan FM channels by holding the FM button.
Adjust the radio volume level from 1 to 15.
Toggle alarm mode on/off; an indicator symbol will appear/disappear.
Set the desired alarm hour and minutes using +/- buttons.
Select alarm sound (1-7) or last radio station. Adjust alarm volume.
Snooze alarm for 5 minutes or stop it. Turn off wake-up light.
Light gradually increases 30 mins before alarm; sound plays at alarm time.
Set sunset mode and time. Hour and minute values can be adjusted.
Turn light on/off, adjust brightness (1-10), select colors, or enable auto-change.
Light comes on at 100% brightness, then gradually reduces to off at sunset.
Details on time display, wake-up simulations, nature sounds, FM radio, and light options.
Includes light flux, brightness levels, colors, volume levels, power supply, and battery type.
Low batteries may cause malfunction; replace with fresh ones for proper operation.
Diagram identifying buttons for time, alarm, FM, light, volume, and display.
Avoid pressing multiple buttons simultaneously; ensure >1 sec interval between touches.
Unplug for malfunctions, remove batteries if unused, replace low batteries to retain settings.
Product is electronic waste; do not dispose with household waste. Recycle properly.
Information on correct disposal for UK, FR, DE, NL, and PL regions.
To Next Page