12
Basic functions
Switching on
1 Turn on the television set with »IO« on the television set.
– If only the LED illuminates, the set is in standby mode.
– Turn on the television set with »1…0« or »P+« or »P-«.
Switching to and from standby
1 Press the »Ǽ« button to switch the television to standby mode.
2 Press »IO« on the television set to switch it off completely.
– This saves electricity.
Selecting channels
1 Use »1…0« to select channels directly.
2 Press »P+« or »P-« to move up and down channels.
Selecting AV channels
1 To select AV channels, press »0« to open the AV menu, press
»P+« or »P-« to select the AV channel and »OK« to confirm.
Adjusting the volume
1 Press »
Ǹ
« or »
Ƿ
« to adjust the volume.
Muting
1 Press »
p
« to switch the sound off (mute) and to switch it on
again.
Displaying/concealing the clock
1 You can display or conceal the time by pressing the »Ȅ«
button.
Changing the picture format
The television automatically switches to the 16:9 format if this
format is detected via the Euro-AV socket.
1 To select the picture format, press »
E
« to open the »Picture
format« menu and press »P+« or »P-« to select the picture
format and »OK« to confirm.
TELEVISION OPERATION
___________________
To Next Page
Loading...
