8 / 52 EN
Remote control / User Manual
3.1 Inserting and replacing
batteries
Your air conditioning unit may come with two
batteries (some units). Put the batteries in the
remote control before use.
1.
Slide the back cover from the remote control
downward, exposing the battery compartment.
2.
Insert the batteries, paying attention to match
up the (+) and (-) ends of the batteries with the
symbols inside the battery compartment.
3.
Slide the battery cover back into place.
C
Battery notes:
For optimum product
performance:
•
Do not mix old and new
batteries, or batteries of different
types.
•
Do not leave batteries in the
remote control if you don’t plan
on using the device for more
than 2 months.
C
Battery disposal:
Do not dispose of batteries as
unsorted municipal waste. Refer
to local laws for proper disposal of
batteries.
C
Tips for using remote control:
•
The remote control must be
used within 8 meters of the unit.
•
The unit will beep when remote
signal is received.
•
Curtains, other materials and
direct sunlight can interfere with
the infrared signal receiver.
•
Remove batteries if the remote
will not be used more than
2 months.
3 Handling the remote controller
To Next Page
Loading...
