Grundig VISION 9 42-9870 T - Page 24

24
Angle
You can select the horizontal sound projection angle for sound.
1 Select »Angle« with » V « or » Λ «.
2 Press »
–
« to move the sound projection to the left or press »
+
«
to move it to the right.
Saving
You can save the settings for each sound projection or for all the
settings.
1 Select »Store Beam« or »Store All« with » V « or » Λ « and confirm
with »
G«.
SETTINGS
----------------------------------------------------------------------------------------------------
SOUNDART MANUAL SETUP
Select Beam Left Front
Beam Direct Off
Focus
1.5m
Angle -60
Beam Test On
Store Beam
Store All
Back Close
1
G G
G G
SOUNDART MANUAL SETUP
Select Beam Left Front
Beam Direct Off
Focus
1.5m
Angle -60
Beam Test On
Store Beam
Store All
Back Store Close
1
G G
G G
-80
-60
-40
0
80
60
40