Grundig VISION 9 42-9870 T - Timer Functions

36
CONVENIENCE FUNCTIONS
------------------------------
Timer functions
1 Open the menu by pressing »i«.
– The »PICTURE« menu appears.
2 Select the »FEATURES« menu with » V « or » Λ « and press »G« to
confirm.
3 Select »Timer« with » V « or » Λ « and press »G« to confirm.
Notes:
The current time is displayed in the »Clock« menu item.
Additional operations are explained in the following sections.
Programme timer
You can programme a show you do not want to miss. Eight timer
positions are available.
1 Select »Programme Timers« with » V « or » Λ « and confirm with
»G«.
2 Press »¥« (green) to activate the entry.
3 Select the »Program« with » V « or » Λ «.
Press »
–
« or »
+
« to select the channel.
4 Select the »Date« with » V « or » Λ «.
Enter the date in four digits with »
1 ... 0«.
5 Select »Start Time« with » V « or » Λ «.
Enter the start time in four digits with »
1 ... 0«.
6 Select the »End Time« with » V « or » Λ «.
Enter the switch-off time in four digits with »1 ... 0«.
7 Select »Repeat« with » V « or » Λ «.
If required, select the repeat mode with »
–
« or »
+
«.
8 Select the »Subtitles« with » V « or » Λ «.
If required, select the subtitle language with »
–
« or »
+
«.
9 Select the »SOUND« with » V « or » Λ «.
If required, select the dubbed language with »
–
« or »
+
«.
10 Press »G« to save the settings.
– The timer data is saved to the timer list.
Note:
To delete timer data, press » V « or » Λ « and delete with »3«
(yellow).
11 Press »i« to end the setting.
– The television switches itself on at the preset time for the re-
quired programme.
FEATURES
Time Settings
Timer
e
Menu Language
Parental Control
Menu Transparency 0%
Software Update
Digital Features
Back Enter Close
1
TIMER
Clock 14:00
Programme Timers
e
OFF Time - - : - -
ON Time -:--
-
Program No
---
Back Enter Close
RESET STORE
1