46
Camcorder
Connecting the camcorder
1 Connect the yellow socket »VIDEO« on the television and the
corresponding socket on the camcorder (VHS, Video 8) with a
cinch cable (picture signal);
or
connect the »S-VHS« socket (picture signal) on the television and
the corresponding socket on the camcorder (S-VHS, Hi 8) with a
S-Video cable.
2 Connect the white and red sockets »L R« on the television and
the corresponding sockets on the camcorder with a cinch cable
(audio signal).
Note:
There must not be video signals at »VIDEO« and »S-VHS«
sockets at the same time. This could lead to picture disturbances.
Operating with a camcorder
1 Switch on the camcorder, insert a cassette and start playback.
2 Press »AV«, select the »CVBS« or »S-Video« channel with »
V
« or
»
Λ
« and press »G« to confirm.
Hi-fi system/AV receiver
Connecting the hi-fi system/AV receiver
1 Connect the socket »SPDIF OUT« on the television to the corre-
sponding socket on the AV receiver using a cinch cable (digital
audio signal).
USING EXTERNAL DEVICES
----------------------------------
To Next Page
Loading...
