48
Inserting the Common Interface module
Note:
Switch off the appliance before inserting the CI module in the
»
CI« slot.
1 Insert the smart card into the CI module.
2 Insert the CI module with the smart card into the »CI« slot on the
television.
Note:
To see which CI module is in the Common Interface slot, go to the
»CA - Module« submenu.
Access control for CI module and smart card
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »FEATURES« menu with »
–
« or »
+
« and confirm with
»
G«.
3 Select the »Digital Features« menu with »
–
« or »
+
« and confirm
with »
G«.
4 Select »CA–Module« with »
V
« or »
Λ
« and press »G« to
confirm.
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CI
module and smart card.
5 Press »i« to finish the settings.
OPERATION WITH COMMON INTERFACE
DIGITAL FEATURES
Language Settings
CA-Module No
e
Signal Information
Digital Reset
Back Enter Close
1
To Next Page
Loading...
