EasyManua.ls Logo

Gryphon MOJO S - Crossover Network and Stand

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The speaker terminals are
Gryphons proprietary 5 way
terminals used on Gryphon
products such as the Poseidon
and Colloseums.
The Mojo s basic stand
The mojo s stand places the
speaker in the correct height
for most people. The stand is
sandfilled for weight and dam-
ping. Adjustable spike with
coaster are also provided,
ensuring a effective evacua-
tion patch for vibrations from
the system and vertical align-
ment.
low distortion and with a total
absence of compression.
A category of tweeter rarely
found in monitor-sized spe-
aker systems.
The X-over
The Mojo s x-over is a show-
case of carefully choosen or
purpose manufactured com-
ponents. The extreme
Graphite resistors fra Duelund
Coherent Audio, handmade
conductors from the famous
Danish Jensen company and
excellent low-memory, preci-
sion capacitors from
Germany. All parts are hardwi-
red with special Teflon hard-
insulated silver wire. Parts
such as the entirely handma-
de Duleund resitors and the
Jensen coils are components
rarely found in commercial
speakers
because
of their
prohibitive
cost, but they are
well known and used in
the hardcore DIY commu-
nity. Due to the intrinsic
high pass roll off of the rib-
bon tweeter, the filter is of
fourth order for the tweeter
and the bass units to have
same phase continuity at all
frequencies.
Jensen paper/oil coil
Duelund graphite resistor

Related product manuals