GSM-Repeater RosenFelt F RF EL10-L User Manual

© Copyright reserved V.7.0 EN 1
Instruction manual
10dBm repeaters
RF E10S, RF L10S, RF FB10S, RF A10-EW, RF EW10-L, RF EL10-L, RF 10F ED, RF LED10-A, RF EDW10-L,
RF EDW10-A
13dBm repeaters
RF ED13-L, RF EL13-L, RF EL13-H, RF E13-H, RF ED13-H, RF EW13-L, RF L13S, RF EW13-H
15dBm repeaters
RF E15-L, RF EL15-L, RF 15B ED, RF 15B EW, RF 15F ED, RF LED15-L, RF EDW15-L, RF EDW15-A, RF 15-
5B, RF L15S
17dBm repeaters
RF EL17-H, RF 17ED-H, RF E17-H, RF EW17-H
20dBm repeaters
RF E20-L, RF20B EGSM, RF20B ED, RF 20B EW, RF EL 20-L, RF 20-5B(-T), RF LED20-L, RF LED20L-T, RF
EDW-20L
23dBm repeaters
RF E23-L, RF EL 23-L, RF LED23-L, RF LED23L-T, RF EDW23-L

GSM-Repeater RosenFelt F RF EL10-L Specifications

General

Brand	GSM-Repeater
Model	RosenFelt F RF EL10-L
Category	Repeater
Language	English

Summary

Manual and Golden Rules

Six Golden Rules for Successful Installation

Essential guidelines for proper placement and setup of GSM repeaters to ensure optimal performance and avoid damage.

GSM Repeater Installation Guide

Locating Your Base Station

Interpreting Signal Strength Readings

Outdoor Antenna Placement and Aiming

Ensuring Antenna Isolation

Importance of maintaining sufficient distance and physical barriers between indoor and outdoor antennas to prevent feedback loops.

Connecting the GSM Repeater System

Calibrating the GSM Repeater

Model 1 Repeater Calibration

Single Band Repeater Calibration

Multi-Band Repeater Calibration

Model 2 Repeater Calibration and Smart Function

Using the Smart function and manual adjustments for Model 2 repeaters, including indicator light interpretation.

Model 3 Repeater Calibration and Optimization

Optimizing Model 3 repeaters using the Smart Function, interpreting indicator lights, and understanding signal strength.

Model 4 Repeater Calibration and Modes

Configuring Model 4 repeaters in Manual or Auto modes, understanding signal indicators, and basic troubleshooting.

Model 5 Repeater Calibration and ALC

Calibrating Model 5 repeaters with AGC, interpreting 'ISO' and 'ALARM' lights, and managing self-oscillation.

Model 6 Repeater Calibration and Indicators

Model 7 Repeater Calibration and ISO