Need help?Do you have a question about the GTCO CalComp DrawingBoard V and is the answer not in the manual?
General| Brand | GTCO CalComp |
|---|---|
| Model | DrawingBoard V |
| Category | Graphics Tablet |
| Language | English |
Lists all components provided with the DrawingBoard V digitizer.
Lists accessories available for separate purchase.
Specifies hardware and software needs for serial interface setup.
Specifies hardware and software needs for USB interface setup.
Details the digitizing surface and its boundaries.
Explains the purpose of the menu strip for customization.
Clarifies the function of the power/proximity LED indicator.
Describes the available pens and cursors and their power sources.
Details different cursor variants and their features.
Instructions for positioning and mounting the DrawingBoard V on a surface or stand.
Guide on connecting accessories like the tray or plan holder.
Guidance for configuring digitizer settings for non-Wintab software.
Step-by-step process for installing the essential software drivers.
Detailed steps for connecting the digitizer via an RS232 serial port.
How to use the menu strip for customizing tablet functions and settings.
Configuration for operating modes, increment, prompt, and data rates.
Options for tablet resolution and output format selection.
Configuration for baud rate, parity, line feed, and transducer frequency.
Options for pen pressure, tilt data, and tilt correction.
Setup guide for ARCINFO using CalComp and GTCO DigiPad formats.
Setup guide for AutoCAD (DOS) using ADI and CalComp formats.
Setup guide for CADKey using GTCO DP5 and Summagraphics formats.
Setup guide for DesignCAD (DOS) using GTCO DP5 format.
Setup guide for GenericAD using CalComp, GTCO, and Summagraphics formats.
Setup guide for MapInfo (DOS) using CalComp formats.
Setup guide for MicroStation (DOS) using CalComp 9100 format.
Setup guide for Timberline using CalComp and Summagraphics formats.
Setup guide for VersaCAD using CalComp 9100 format.
How the tablet senses transducer presence and proximity.
How to use the cursor, including button functions and aiming.
Details on the different pen types and their operational characteristics.
Explains fundamental operations like clicking, double-clicking, and dragging with the transducer.
Safe and effective methods for cleaning the digitizer surface.
Guidance on cleaning the cursor body and reticles.
Procedure for replacing worn-out pen tips.
Strategies to minimize interference with monitors.
Adjusting cursor frequency to resolve interference problems.
Adjusting pen frequency to resolve interference problems.
Changing frequency for corded transducers via the menu strip.
A checklist to diagnose issues with the digitizer hardware.
A checklist to diagnose issues with the host computer.
A checklist to diagnose issues related to software and drivers.
A table summarizing common problems, causes, and solutions.
Procedures for sending the product for service.
Guidelines for preparing the product for shipping.
Lists available DrawingBoard V tablet models and their sizes.
Lists available pens, cursors, and their variations.
Lists accessories like trays, power supplies, and cables.
Information on FCC compliance and potential interference issues.
Statement regarding compliance with Canadian radio noise regulations.
Statement of product compliance with EMC and safety directives.
Compliance statement specific to Japan (VCCI standards).
Certification for radio interference suppression in Germany.
Specifies the warranty period and scope for the digitizer and components.
Lists items and damages not covered by the product warranty.
Outlines the procedure for requesting warranty repairs.
Information on how to get technical assistance and online resources.
Legal statements disclaiming implied warranties.
Legal notices regarding warranty application and user rights.
To Next Page