GTO PRO3040-G3 - Page 5

5
Step 7
Plugthetransformerintotheelectricaloutlet.
(Use of a surge protector with the transformer is strongly
recommended.)
HINT: Keep a few mothballs in the control box to
discourage insects from entering it and damaging the
control board.
Step 6
Strip
1
/2" of insulation from the ends of the low voltage
wire. Attach these stripped ends to the transformer
terminals.
A dab of household petroleum jelly on each terminal will
help prevent corrosion.
Make sure the exposed wires do not touch each other!
SURGE PROTECTOR
Transformer