Engage the Parking Brake and turn the key
switch to the OFF position.
Remove factory canopy, rear struts, seat
back, seat bottom, and motor cover. Retain
all for rear installation.
Bagwell BracketFootrest
Armrests
Seat Frame
Seat Back Support Bar
Seat
Back Brackets
Footrest
Brackets
Main Brackets
HD Bracket
Attach Main Brackets with factory boot
cover to frame as shown on both sides using
hardware retained from Step 1.
*Brackets should angle toward rear of cart.
Lean Back Cushion
Seat Bottom Cushion
INCLUDED:
Rear Flip Seat Kit & Frame Only Kit
Installation Instructions for
E-Z-GO
®
RXV
®
*Cushions not included in Frame Only Kits
Tool Required: 15mm Socket & Wrench
Lean Back Supports
Note: This kit is designed to work with old and new model RXV
body styles. The following steps are identical for all year models.
To Next Page
Need help?
General
