ASSEMBLY INSTRUCTIONS
CONTENTS
x1 x1
1.
Loosen and detatch the threaded top cap covering the socket (a)
Insert the GUBI G4 bulb (included) into the socket placed in center of the lamp (b)
Make sure that the bulb is placed in upright position.
Once the lightbulb is fixed, re-attach the top cap back in position. Make sure the
cap is fully tightened.
a)
Note: If using other light bulbs than included, GUBI cannot
vouch for given light and battery efficiency. If in need of a
new light bulb, please contact GUBI.
x1
b)
x1
To Next Page
Loading...