Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product Safety
Product compliance
with respective EU
standards
Protection insulation
Environment Protection:
Wastes to be disposed
of in a professional
manner not to harm the
environment .
Cardboard packaging
to be collected for
recycling .
Faulty and/or disposed
of electrical/electronic
appliances to be
collected by authorised
salvage places .
Packaging:
Protect from moisture Keep Up Fragile
Technical data:
Power connection Motor capacity
Product specific:
Speed (rpm) Impacts number Left run/Right run Drilling capacity
Assigned Use
The manufacture shall not be held liable for any damage should the provision of general regulations and this instruction manual be not
observed. .
Disposal
Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given in
"Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during transport. Packaging materials are usually selected according to their effect on
environment and disposal methods and can therefore be recycled.
Returning of the packaging back to circulation saves resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children and dispose as soon as possible.
Operator Requirement
The operator is required to read the operating instructions before use.
Qualification
No special qualification is required for use of the unit except for detailed direction by a professional.
To Next Page
Loading...
