Guidecraft Kitchen Helper G97325 - Assembly and Usage; Assembly Steps; Storage Instructions; Maintenance Checks

E
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • (800) 524-3555 • www. g u i d e c r a f t . c o m
B
A
A
A
A
D
D
E
AA
A
Assembly
1. Remove item from carton. Fold sides out until
they are straight.
2. Rotate clips on inside of doors until they are
firmly in place (Diagram 1).
3. Place platform in the down position, so that it
rests on the crossbar.
4. Attach feet (D) to the front of the Kitchen
Helper using screws (A). Please note: because
the screws crisscross inside the posts, half the
feet have pre-drilled holes and pegs placed in
a higher position than the other feet.
5. Attach feet (E) to the sides and back of the
Kitchen Helper using screws (A).
5. Use screw (B) to hold platform in place when
in use (Diagram 2).
Storage
1. Remove screw (B).
2. Raise platform and hold in position.
3. Rotate side clips so that they are in the open
position (Diagram 1).
4. Fold in sides accordian-style.
Maintenance
To ensure safe use of the Kitchen Helper,
please check all bolts periodically to ensure
they are securely fastened.
Diagram 1
Diagram 2
E
E
E
E
E